General product list::
Four ball tester.
Reciprocatory friction monitor
Tapping torque tester
Low temperature torque test rig.
High temperature grease tester.
Shear stability tester.
High Frequency Reciprocatory Rig
Multispecimen Tester.
Two Roller rolling sliding Tester.
Journal Bearing Fatigue Tester.
Wear and friction monitor
Reichert Type Tester.
Dry abrasion tester
Two body abrasion tester
Abraser
Friction material tester
Coal abrasive index tester
Stone abrasion resistance test rig.
Scratch tester
Slurry erosion tester
Airjet erosion tester
Multi Tribo tester
Journal bearing tester
Bearing fatigue tester
Metallurgical sample saw
Thermal cycling furnace
High Speed Erosion Tester
Abrasion Tester
Pin-on-Vee Block Tester.
Glazed Tile Abrasion Tester.
Unglazed Tile Abrasion Tester
Carbon brush test rig.
Moisture meter.
Photo resist spinner.
Michell tilting pad apparatus.
Rotating bar bending fatigue tester
 Slurry Abrasion Tester

Purpose
Determination of the slurry abrasion resistance of solids against wet sand and rubber wheel.

Test Configuration
Rectangular specimen, Neoprene rimmed rubber wheel, sand-water slurry.

Features
Auto shut-off preset evolution.
Optional load cell to set test load.

Standard
ASTM G 105


Specifications
Parameter
Unit
Nominal Value

Remarks
Specimen Size
inch (mm)
1.0 (25.4)
2.25 (57.2)
0.25 to 0.625 (6.4 to 15.4)
Width
Length
Thickness
Rubber Wheel Size
Inches(mm)
7(178)
0.5 (12.7)
Diameter
Width
Hardness
Shore A
50±2
60±2
70±2
3 wheels, Neoprene rubber rimmed
Tets Load
lbf (N)
50.0 ± 0.8 (222.4 ± 3.6)
Range is 100 N to 300N,Deadweight loading
Test Speed
RPM
245±5
1 HP geared motor
Revolution Counter
Counts
0-9999
Presettable in steps of 1

 
Send an enquiry
<<Back <<Previous Tester Next Tester >>


Copyright © Ducom.All rigts reserved.