General product list::
Four ball tester.
Reciprocatory friction monitor
Tapping torque tester
Low temperature torque test rig.
High temperature grease tester.
Shear stability tester.
High Frequency Reciprocatory Rig
Multispecimen Tester.
Two Roller rolling sliding Tester.
Journal Bearing Fatigue Tester.
Wear and friction monitor
Reichert Type Tester.
Dry abrasion tester
Two body abrasion tester
Abraser
Friction material tester
Coal abrasive index tester
Stone abrasion resistance test rig.
Scratch tester
Slurry abrasion tester
Slurry erosion tester
Airjet erosion tester
Multi Tribo tester
Journal bearing tester
Bearing fatigue tester
Thermal cycling furnace
High Speed Erosion Tester
Abrasion Tester
Pin-on-Vee Block Tester.
Glazed Tile Abrasion Tester.
Unglazed Tile Abrasion Tester
Carbon brush test rig.
Moisture meter.
Photo resist spinner.
Michell tilting pad apparatus.
Rotating bar bending fatigue tester
  Metallurgical Sample Saw

Purpose
The metallurgical sample saw facilitates scientists, metallurgists and other experimentalists to cut sample for testing on the tribometers.

The saw produces cut with minimum damage to the structure of material.
The Saw Consists of:`
Blade assembly along with coolant tank and motor drive panel with start stop swicth and RPM control units.
 
Specimen holder along with weight, counterpoise and cut-off switch.



Specifications
Cutting speed range
10-300 RPM with display
Load range
50-250gm adjustable
Blade size
OD 125mm x 0.3 mm thick
 
Send an enquiry
<<Back <<Previous Tester Next Tester >>


Copyright © Ducom.All rigts reserved.